Free Inspection and Moisture Map
Thermal imaging, moisture meter readings, and boroscope inspection of the cabinet cavity. You get a written scope and a flat price the same day, with no charge for the visit.
Licensed
Licensed & Bonded
Fully Insured
Insured & Bonded
24/7 Emergency
Same-Day Response
Warranty Backed
11+ Years Trusted in Philadelphia
What Our Kitchen Mold Removal Includes
Every kitchen job we run includes the full remediation sequence, not a partial fix. Here is what is covered in the standard scope, and what we handle as an add-on if the inspection turns up more than expected.
Full Containment Setup
6-mil poly barriers and a negative air machine keep spores out of the rest of your home. An air scrubber with HEPA filters runs for the entire job, including overnight drying.
Mold Removal and Antimicrobial Treatment
Contaminated material is removed and bagged, surfaces are HEPA vacuumed, and framing plus salvageable cabinet boxes get treated with antimicrobial coating and a disinfectant pass.
Structural Drying
Dri-Eaz and Phoenix dehumidifiers and air movers run until moisture readings hit dry standard. We check daily and give you the numbers so you can see the progress.
Clearance Testing and Documentation
Air sampling and final moisture readings confirm the kitchen passed. You receive the clearance report in writing, formatted for insurance and resale purposes.
Prevention Recommendations
We tell you exactly what caused the mold and what to change: under-sink leak alarms, a small dehumidifier, cabinet ventilation, or a vapor barrier behind an exterior wall.
What Kitchen Mold Removal in Philadelphia Actually Involves
Kitchen Mold Removal in Philadelphia is the process of locating hidden moisture, containing the affected area, physically removing mold growth from cabinets, drywall, and framing, then drying and verifying the space so it does not return. Kitchens are the highest-risk room in the house because supply lines, dishwashers, ice makers, and sink traps all leak behind closed doors. We use a thermal imaging camera and a moisture meter to find water you cannot see, then a boroscope to inspect inside wall cavities before we cut anything open.
Philadelphia kitchens deal with a specific set of problems. Rowhome plumbing runs through shared walls, older galvanized supply lines corrode from the inside, and radiator-fed humidity keeps cabinet interiors damp through winter. When a slow drip feeds a cabinet base for two or three weeks, you get black mold, a musty odor, and swollen particleboard. If you search kitchen mold removal in Philadelphia PA near me after a dishwasher leak, we can be on site the same day, and we handle kitchen mold remediation services Philadelphia, Pennsylvania customers need without tearing out more cabinetry than necessary.
Our Kitchen Mold Remediation Process, Step by Step
Every job follows the same five stages. You will know what is happening, how long it takes, and what it costs before we start. Most kitchen jobs run two to four days from inspection to clearance.
01
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
02
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
03
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
04
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Tools and Methods We Use on Every Job
Tools & Equipment
Thermal Imaging Camera
Finds temperature differences that reveal hidden moisture behind cabinet backs, under subfloors, and inside wall cavities before we open anything.
Pin-Type Moisture Meter
Gives exact moisture content readings in wood and drywall so we know the contamination boundary and when the structure has reached dry standard.
Boroscope
A camera on a flexible probe that lets us see inside closed wall cavities and cabinet voids without cutting a large access hole.
Negative Air Machine and Air Scrubber
Maintains negative pressure in the containment zone and filters airborne spores through HEPA filters so they do not spread into living areas.
HEPA Vacuum
Captures fine mold spores and debris from surfaces and framing that a shop vac would simply blow back into the air.
Dri-Eaz and Phoenix Dehumidifiers
Pull moisture out of framing, subfloor, and cabinet boxes during the drying phase. We monitor readings daily and adjust placement.
Fogger with Benefect and Concrobium
Delivers antimicrobial treatment into tight cavities and neutralizes musty odor at the source instead of masking it.
Methods & Standards
IICRC S520 Remediation Standard
We follow the IICRC S520 mold remediation standard for containment, removal, cleaning, and verification. It is the benchmark carriers and clearance inspectors recognize.
Containment and Negative Pressure
Every job gets sealed containment with a negative air machine running. This is the single most important step for keeping spores out of the rest of your home.
Antimicrobial Coating and Encapsulation
After removal, framing and salvageable cabinet boxes get coated with antimicrobial coating. In crawl spaces and on exterior walls we add a vapor barrier or encapsulation liner to cut the moisture drive.
Post-Remediation Verification
Air sampling and moisture readings confirm the job passed before we remove equipment. No verbal all-clear, just documented results you can keep.
When to Call for Kitchen Mold Removal
01
You opened the cabinet under the sink and found dark growth on the back panel after a slow drain leak.
What we do: We inspect with a moisture meter and boroscope, contain the cabinet, remove the contaminated panel, treat the framing, and dry the cavity over 2 to 3 days.
→ The cabinet is clean, dry, and treated, and you have clearance documentation showing the kitchen passed.
02
A dishwasher line let go overnight and the kitchen floor and cabinet base are soaked.
What we do: We run emergency water extraction, set drying equipment the same day, and monitor moisture readings until the structure is dry. If mold has already started, we remediate it in the same job.
→ Water is out within hours, the structure dries in 3 to 4 days, and mold never gets a foothold.
03
You are selling your Philadelphia rowhome and the buyer's inspector flagged mold in the kitchen.
What we do: We run inspection and testing, remediate the affected area, and provide post-remediation verification with air sampling results the buyer's agent can review.
→ You get a clearance report that satisfies the buyer and keeps the sale on track.
04
A rental unit near University City has a recurring musty smell and the tenant is complaining.
What we do: We inspect the kitchen and adjacent walls, find the moisture source, remediate, and install prevention measures like a vapor barrier or leak alarm.
→ The odor is gone, the unit passes clearance, and you avoid a repeat call on the same kitchen.
How Kitchen Mold Removal Runs in Philadelphia
Philadelphia kitchens sit in some of the oldest housing stock in the country, and that shapes every job. Rowhomes share plumbing walls, so a leak in your neighbor's unit can show up as moisture in your cabinet. Galvanized supply lines in pre-war buildings corrode from the inside and drip for months before anyone notices. Radiator heat keeps interior humidity high through winter, and summer humidity in Philadelphia regularly sits above 70 percent, which is enough to keep a closed cabinet damp. We work with the building, not against it: we use a boroscope to inspect shared wall cavities before cutting, we follow EPA Lead-Safe practices on pre-1978 trim and cabinet surrounds, and we install vapor barrier and encapsulation liner where exterior walls drive moisture inward. If you need kitchen mold treatment Philadelphia, Pennsylvania homeowners can count on, we handle the whole sequence from inspection to clearance, usually in 2 to 4 days. Call +1 2152813400 and we will get a technician to your kitchen.
Neighborhoods We Serve
-
Fishtown
A high concentration of renovated rowhomes with original plumbing chases. Kitchen leaks here often travel into shared walls before they show up on the surface.
-
Center City
High-rise kitchens with tight cabinet runs and shared risers. Water from an upper unit can appear as mold in a lower kitchen, so we inspect the ceiling cavity too.
-
Chestnut Hill
Older stone and stucco homes with exterior-wall kitchens. These walls run cold in winter, which drives condensation and mold on cabinet backs.
-
University City
Rental-heavy housing where small leaks get reported late. We handle a lot of repeat-prevention work here, including leak alarms and vapor barrier installs.
-
Port Richmond
Working rowhomes with basement kitchens and older drain lines. Sewage backup and slow drain leaks are common calls in this part of the city.
Local Conditions We Plan For
-
Summer humidity above 70 percent
Closed cabinets stay damp for weeks, which is enough for mold to colonize shelf edges and back panels even without a plumbing leak.
-
Winter radiator heat in rowhomes
Interior humidity swings and cold exterior walls create condensation inside cabinet cavities, a common source of mold on exterior-wall kitchens.
-
Pre-1978 building stock
Lead paint on trim and cabinet surrounds means we follow EPA Lead-Safe practices during removal, which adds a step but keeps your family safe.
-
Shared plumbing walls between units
A neighbor's leak can feed mold in your kitchen. We inspect the shared cavity with a boroscope before assuming the source is inside your unit.
Under-Sink Leak in a Fishtown Rowhome
Kitchen Mold Problems We Solve in Philadelphia
Most kitchen mold calls come down to one of a handful of causes. Here are the ones we see most often in Philadelphia homes, what happens if you leave them, and how we fix them.
Problem
Slow supply-line leak under the sink
Water feeds the cabinet base for weeks, swelling particleboard and growing black mold on the back panel. By the time you smell it, the leak has usually been running a month.
Our Fix
We locate the leak with a moisture meter, repair or flag the line for your plumber, remove the contaminated base panel, treat the framing, and dry the cavity to dry standard before closing it up.
Problem
Dishwasher door gasket failure
Every cycle pushes a thin film of water into the cabinet surround. Over months, that film feeds mold along the cabinet side panel and the subfloor edge beneath it.
Our Fix
We pull the dishwasher, inspect the surround with a boroscope, remove affected material, HEPA vacuum the cavity, and treat with antimicrobial coating. We also tell you whether the gasket needs replacing.
Problem
Ice maker line dripping behind the fridge
The drip is invisible and lands on the wall and floor behind the unit. Mold grows on the drywall and baseboard, and the musty odor spreads through the whole kitchen.
Our Fix
We pull the fridge, map the moisture with thermal imaging, remove contaminated drywall, treat the framing, and dry the wall cavity. The line gets flagged for repair before we close anything up.
Problem
Radiator humidity in winter
Philadelphia rowhomes with radiator heat run damp through the cold months. Cabinet interiors on exterior walls stay humid, and mold colonizes the back panels and shelf edges.
Our Fix
We treat the affected surfaces, run dehumidification to bring the kitchen under control, and recommend a vapor barrier plus a small dehumidifier for the winter months.
Problem
Musty odor that keeps coming back
Odor means active growth somewhere you cannot see, usually inside a wall cavity or under the subfloor. Wiping surfaces does nothing because the colony is still there.
Our Fix
We use a boroscope and moisture meter to find the hidden source, remove the growth, treat with Benefect and Concrobium, and run a fogger treatment to neutralize the odor at the source.
Why Philadelphia Homeowners Call Us First
Kitchen mold spreads fast in a closed cabinet. The longer it sits, the more material has to come out. Here is what you get when you call us instead of waiting another week.
-
Same-Day Emergency Response
We answer the phone 24/7 and run emergency kitchen mold removal Philadelphia calls seven days a week. Most Philadelphia County jobs get a technician on site within 2 to 4 hours of your call. That matters when a supply line just let go and the cabinet base is still wet.
-
Hidden Moisture Found First
A thermal imaging camera and pin-type moisture meter tell us exactly how far the water traveled before we remove a single cabinet door. We map the wet zone, mark the boundary, and only remove material that is actually contaminated, which keeps your rebuild cost down.
-
Clearance Testing Included
We do not call a job done because it looks clean. After remediation we run post-remediation verification with air sampling and moisture readings. You get documentation showing the kitchen passed, which matters if you ever sell the house or file an insurance claim.
-
11 Years in Philadelphia Kitchens
We have worked Philadelphia kitchens since 2015, from Fishtown rowhomes to Chestnut Hill stone houses. We know how these buildings are framed, where the plumbing runs, and which cabinets can be saved with antimicrobial coating instead of full replacement.
Kitchen Mold Removal Pricing in Philadelphia
Typical 2026 pricing for kitchen mold removal in Philadelphia runs $650 to $2,800, with most single-cabinet jobs landing near $1,100. A small surface treatment might be $400 to $700. Jobs that involve cabinet removal, drywall replacement, and subfloor drying push toward the top of that range. We give you a flat number after the free inspection, and if we open a wall and find more, we stop and re-quote before continuing. No hourly billing, no surprise line items. If you want affordable kitchen mold removal Philadelphia PA pricing without cutting the containment or drying steps, call us and we will walk you through it.
Typical Investment Range
$400 - $2,800 depending on scope
The number that matters is not the cheapest quote, it is the job that does not come back. Skipping containment or drying saves a few hundred dollars today and costs thousands when the mold returns and the cabinet has to be torn out.
What changes the price
01
How far the water traveled
A leak contained to one cabinet is a small job. Water that reached the subfloor or an adjacent wall cavity means more removal, more drying equipment, and more days on site.
02
Cabinet salvageability
Solid wood and plywood boxes can usually be cleaned and coated. Particleboard and MDF that has swelled has to be replaced, which adds material and labor cost.
03
Mold type and spread
Surface mold on a cabinet back is straightforward. Black mold inside a wall cavity or under the subfloor requires full containment, more removal, and longer drying time.
04
Drying time required
A leak caught in a week dries in 2 to 3 days. A leak that ran a month can take 4 to 5 days of dehumidification, which adds equipment days to the bill.
05
Access and containment complexity
A ground-floor kitchen with a clear work area is faster than a third-floor condo where we have to protect common hallways and coordinate with building management.
06
Insurance coverage
If your policy covers the leak, most of the cost may be reimbursed. We document with Xactimate-compatible line items and photo logs so your adjuster has what they need.
Licensed, Certified, and Documented
Licensed & Certified
- IICRC WRT (Water Restoration Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
- IICRC AMRT (Applied Microbial Remediation Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
- PA Mold Remediation License — issued by Commonwealth of Pennsylvania
- EPA Lead-Safe Certified Firm — issued by U.S. Environmental Protection Agency
- OSHA Compliance — issued by Occupational Safety and Health Administration
Verified Reviews
Google ★★★★★4.9
Found the leak under our sink in ten minutes with a thermal camera. Gave us a flat price, contained the kitchen properly, and the clearance test came back clean. They even handled the insurance paperwork. Best experience we have had with a contractor in Philadelphia.
Yelp ★★★★★4.8
We had black mold behind the dishwasher in our Center City condo. They pulled the unit, removed the affected drywall, and dried everything over four days. Kept us updated with moisture readings every morning. No mold, no smell, and the clearance report was ready when we needed it.
BBB ★★★★★4.9
Called them on a Sunday after a supply line burst. They were at the house within three hours, extracted the water, and set drying equipment the same day. Professional, clean work, and they explained every step. Would call them again without hesitation.
What Philadelphia Customers Say
Real experiences from customers who chose our Kitchen Mold Removal services.
“Our dishwasher had been leaking behind the cabinet for weeks and we had no idea. They found it with a thermal camera in about ten minutes, showed me the moisture map, and gave me a price on the spot. Three days later the cabinet was dry, treated, and passed clearance. They even gave me the paperwork for my insurance claim.”
D
Danielle R.
Homeowner, Fishtown
“I called three companies about black mold under my kitchen sink. Two wanted to rip out the whole cabinet run. Mold Removal Philly saved the cabinet boxes, replaced only the swollen base panel, and sealed everything with antimicrobial coating. Half the cost of the other quotes and the musty smell is gone.”
M
Marcus T.
Homeowner, Mount Airy
“We manage several rentals near Penn, and kitchen mold is a recurring headache in these older buildings. They respond fast, contain the work properly, and always send clearance documentation. I have used them four times now and never had a callback on the same unit.”
P
Priya S.
Property Manager, University City
Kitchen Mold Questions Philadelphia Homeowners Ask
Real answers to the questions we hear most often from local homeowners and property managers.
How much does kitchen mold removal cost in Philadelphia PA?
Most kitchen mold jobs in Philadelphia run $650 to $2,800, with a typical single-cabinet job around $1,100. Small surface growth on a cabinet back might be $400 to $700. Jobs involving cabinet removal, drywall replacement, and subfloor drying push toward the top of the range. Inspection and written scope are free, so you know the number before anyone starts work.
What causes kitchen mold in Philadelphia?
The three biggest causes we see are slow supply-line leaks under the sink, dishwasher door gasket failures, and ice maker lines that drip behind the fridge for weeks. Philadelphia's older galvanized plumbing corrodes from the inside, and winter radiator humidity keeps cabinet interiors damp. Add a closed cabinet door and you have a dark, wet, low-airflow box, which is exactly what mold needs.
Can I remove kitchen mold myself in Philadelphia?
You can wipe surface mold off a cabinet door with a disinfectant, but that does not fix the moisture feeding it. If the mold is inside a cabinet base, behind drywall, or under the sink, DIY cleaning spreads spores and leaves the colony intact. Anything larger than a square foot, or anything with a musty odor that returns, needs professional containment and drying.
Does kitchen mold removal require cabinet replacement in Pennsylvania?
Not always. Solid wood and plywood cabinet boxes can usually be cleaned, HEPA vacuumed, and sealed with antimicrobial coating. Particleboard and MDF that has swelled or crumbled has to come out, because it cannot be dried or structurally saved. In our experience about half the cabinets we inspect can be salvaged. We tell you which is which before we remove anything.
Other Mold Services We Handle in Philadelphia
Mold Inspection and Testing
Every kitchen job starts here. We use thermal imaging and air sampling to confirm mold type and map the wet zone before removal begins, so the scope is based on readings, not guesswork.
View Mold Inspection and TestingMold Remediation
Full-service remediation for growth that has moved past the kitchen into adjacent walls, floors, or ceiling cavities. Same containment, HEPA filtration, and clearance testing standards we use on kitchen jobs.
View Mold RemediationBlack Mold Removal
Black mold behind a cabinet or under a sink needs containment before anything is touched. We isolate the area, remove contaminated material, and treat framing with antimicrobial coating to stop regrowth.
View Black Mold RemovalResidential Mold Removal
Kitchen mold is often the first sign of a larger household moisture problem. We inspect the whole home, including bathrooms, basements, and attics, and treat every affected area in one coordinated job.
View Residential Mold RemovalCommercial Mold Removal
Restaurant and commercial kitchen mold carries health-code stakes. We work after hours, document with clearance testing, and give you the paperwork your inspector wants to see.
View Commercial Mold RemovalAttic Mold Removal
Attic condensation and roof leaks feed mold that can drip down into kitchen ceiling cavities. We trace the path and treat both ends so the kitchen repair actually holds.
View Attic Mold RemovalContact Mold Removal Philly
Call +1 2152813400 or email [email protected] and we will schedule an inspection, usually the same day if you reach us before noon. Water emergencies get 24/7 response. We serve every neighborhood in Philadelphia County, from Center City to Northeast Philadelphia.
Mold Removal Philly
-
Phone
+1 2152813400 -
Address
Pearson Avenue, Unit A Philadelphia, PA 19114
-
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available